Utilizing More Of The Raw Materials Extracted Through Mining Operations

Mining is the extraction from the Earth of precious raw materials or other geological materials, typically from an ore body. Mining ores contain coal, shale, gemstones, limestone, chalk, dimension stone, metals, gravel, salt, and clay. Mining shall be necessary to extract any material which cannot be cultivated by agricultural processes or which may be artificially manufactured in a laboratory or factory. Mining in a general context entails the production of some non-renewable resource, such as coal, natural gas, or even water. Modern mining processes include the prospecting of ore bodies, the study of the possible benefit of the proposed mine, and the extraction of the desired raw materials. Also, it’s utilized by various industries such as Cement Manufacturing Industry, Steel Manufacturing Industries, Ferrous Foundries, etc.

Raw materials:

A raw material also knowns as feedstock is an unprocessed/basic material used for the manufacture of commodities, energy, finished goods, or intermediate materials as the main substance. As a feedstock, the term signifies that these materials are bottleneck assets and are needed to manufacture other goods.

The most significant aspect of the mining process is the raw materials which is used to produce bricks. The consistency of the brick and the progress or loss of the brick plant can also be traced back to the raw materials. The preparation and development of raw materials is the foundation of a well-run brick factory. Brick plants are also constructed close to the main raw materials that have been used for decades. Normally, the nature and durability of these raw materials differ across the entire mine. If the characteristics of any of the extracted materials are so far away from the requirements, it could be appropriate to avoid those raw materials, thus reducing the stocks of raw materials.

A few of the characteristics and ways to maximize the use of raw materials are listed below.


The following are the characteristics of the raw materials:

Enhancement and Diversity:

Complete utilization of raw materials from a mining site is the main target when extracting raw materials. A written strategy can be drawn up that would use a variety of raw materials to produce quality bricks through some research & characterization of its properties. Mine management can be achieved that results in the ideal colour, remove contaminants, and includes the correct ratio of sand, silt, and clay particles.

Plans for the use and optimization of raw materials will also lead to ample variance to adversely affect the brick quality. The composition of the sand, silt, and clay may differ, which can result in a raw material mix that is less than refined. Particle size ratios not defined can result in poor extrusion, low plasticity, and low green-dry strength.

Improvement of Raw Material:

It could be appropriate to strengthen raw materials with a binder and/or plasticizer to exploit the whole mining field. This can make marginal mixtures of raw material much better than without the use of an additive. By using the appropriate dose of a clay conditioner, a brick plant will extend the reserves of clay by continuously performing well on the marginal material.

Exit mobile version