Solar panels are upgraded and advanced so that they can generate enough energy to meet the daily requirements of a residence. It has been a popular choice for citizens for the past few years. Installing solar panels is simple and requires a piece of basic knowledge. Before starting with the actual process, you shall go through How Solar Panels Are Built To Function In Real World. After you get a short and informative initial brief, we shall below discuss the ways to install solar panels step by step.
1. Installing Mounts:
To ensure that solar panels generate the maximum amount of energy, it is important that the rays of sunlight strike directly on the surface. Solar panels must be placed in a way such that it is free from all kinds of obstructions. Things like trees, buildings and other objects shall not cast a shadow on the solar panels. Mounts are installed to take solar panels at a particular height. These mounts also ensure that all the solar panels are uniformly fit at a particular height. Another function of these mounts is to make solar panels steady and safe.
2. Solar Panel Installation:
Once the mounts are ready, it is time to bring in solar panels for their installation. Take the assistance of a couple of people and make sure you safely place solar panels on the mounts. Keep them in the right direction to ensure maximum sunlight. For maximum safety as well as a precaution, you shall screw these solar panels tightly with the mounts. This will keep them steady even during strong winds. Take the assistance of an expert to prevent solar panels from damaging while installing them. The more accurately you place and tighten screws, the longer will the system last. To make effective decisions about its installation, you must read about how does home solar power systems work. Once you have installed solar panels, you shall keep checking their durability and strength from time to time. If you observe any problems with the same, you shall check all the fittings and make necessary additions to the same.
3. Wiring:
It is finally time to fit all the wires from the electrical points to your solar panel. This will carry energy produced from solar panels to the required destination. However, it is suggested to hire a professional for wiring work if you are not an expert at the same. Else, there might be serious problems such as fire and damage to solar panels if wiring is not done with care. Make sure that there is enough distance between the two wires. Do not compromise on the quality of the wires you use for solar panels. You can also include some switches in the wiring system to make better control of the electrical system. The entire system of solar panels will only be functional if all the wiring is done accurately. Turn off the system if you observe an unpleasant smell or spark in the same.
4. Connect Solar Inverter:
Do you want to store the energy generated by solar panels? Then you shall have an inverter. By doing this, you will increase the reliability of solar panels for electricity consumed by your residence. Connecting solar-generated electricity to an inverter will also ensure that electricity is converted into a usable form. Make sure you have connected all the wires accurately to prevent damage to the equipment. A solar inverter will be as good as a battery for storing surplus energy generated by solar panels during the daytime.
5. Connection to the Grid:
After the energy has reached from solar panels to the grid, it shall now be taken to the main supply box of your house. Firstly, you shall buy essential and required wires and plugs to connect the solar inverter to the main grid of your house. This will allow you to use the energy generated by solar panels. Once you have connected solar generated to the main electrical grid of your house, you will be able to use the same energy to operate your electronic appliances. The output source in a solar inverter will carry the generated energy to your house.
6. Turn It On:
After you have made all the installations and fittings, you shall turn the system on to see if it works. After a certain amount of electricity is generated through solar panels, you will be able to see the same in the solar inverter. Make sure it reaches safely and efficiently to your house’s electrical grid. To keep a record of the amount of energy generated and produced by solar panels, you can refer to the display of a solar inverter. You will get most of the required information on that display panel. After a couple of months, you will observe a sudden drop in electricity bills. This is an indication that your entire system of solar panels is working efficiently. If you do not observe a change, then there might be a fault in the installation of solar panels. Turn the system on and see if things are working efficiently.
7. Site Inspection:
As it is a matter of electricity, we can not afford to take a risk. This is the reason why it is suggested to take frequent site inspections for solar panels. This will ensure that you get to notice if there is any sort of problem with the installation. This will not only keep you safe but will also ensure the smooth functioning of solar panels. To ensure that your solar panels remain in a similar condition as they are, you shall get the best Solar panel insurance. If you have done the entire installation on your own, then you shall call an expert to check the same. This small step will ensure additional safety and will help you diagnose any faults if any. For the best results, you can conduct random site inspections every couple of weeks.