It’s summer, and we know what that means: the heat is on. With temperatures expected to reach 100 degrees in most areas, homeowners need to be vigilant about home cooling. In this blog post, find out whether DIY air conditioning repair can save you some cash as well as help you avoid a potentially dangerous situation.
What Can Ruin an Air Conditioner?
What goes wrong with your AC? We will walk you through our AC troubleshooting process, starting from the most common causes of failure and working towards some more complex issues. First, of course, there’s nothing worse than coming home from work or school only for itchy skin because that means there was no cooling relief in sight. The most common problem with an air conditioning system is a plugged filter or evaporator coil. This can be caused by failure to seal properly around the ventilation louvres on these areas, which leads to dirt and debris in your home’s primary line. The lack of proper return airflow also makes it easy for particles to accumulate here. Therefore, even if you don’t see any physical signs right away, mission control could ruin its efficiency over time because this part has no chance of getting cleaned out anytime soon.
Quick DIYs for Your Air Conditioner
When staying within safety guidelines, check manufacturer specifications before trying anything yourself or hire an HVAC professional ASAP. It might seem like common sense, but there are many elements involved when repairing any equipment, so use caution.
Check and Change the Air Filter.
An essential step for handling an AC that’s unevenly cooling, putting out low airflow, or tripping circuit breakers is checking the air filter. Over time the dust will accumulate on this essential component, and eventually, it’ll be clogged enough to obstruct ventilation. It can lead to malfunctions with your unit if left unchecked. We recommend changing every three months depending on how often you use them (every day versus only once per week).
Look At the Thermostat.
Sometimes, all it takes is the wrong settings, and you’ll be able to find out what’s causing your problem quickly. A person can make changes on their own by mistake when they’re programming or changing modes for different appliances like heat pumps that need HVAC. This type of machine needs consistent warmth throughout its system, unlike air conditioning systems where temperature fluctuations happen less commonly but still impact overall efficiency. This happens often, so pay attention if something seems wrong with either device.
Examine Your Ducts
There are many ways to keep your home cool, but one of the most overlooked aspects is checking out what’s going on up top. First, examine your ducts and make sure they’re working properly by feeling around inside with two fingers (or more) for any obstruction that could be causing a blockage in airflow; if there is no response, then it needs attention now before things heat up.
Reset Tripped Circuit Breakers.
If the AC won’t turn on and there are no other signs of problems, check for a breaker tripped in your electrical panel. If you find one, it turns out not to be an issue when resetting them all back to “On” or getting another opinion from someone who knows what they’re doing. Chances could exist that something may have been pulled too hard on by accident while running repairs around town before coming home, which would require professional help.
Regularly Clean the Outside Cabinet.
If your air conditioner is not performing at its best, it might be because of dirt on the outside condenser. Also, the cabinet that releases heat and absorbs other things like water will have trouble releasing enough energy if there are large obstructions in front of it. So, make sure you clean up any leaves around anything near where these ducts go out, so nothing stops airflow too much–and remember always wear gloves when cleaning NSF certified surfaces such as stainless-steel trim inside cabinets.
Keep Your Room Vents Open.
Make sure the room vents are open, even if you leave your windows and doors closed. Closing them will not help save energy because it increases pressure in an AC, which can cause damage or force a shut-off early. Instead, make sure all those pesky little obstructions that might make life difficult for air conditioners to do their jobs have been picked up. This ensures the ACs don’t end up running at full power, trying to keep coolant flowing through coils when there isn’t enough air going around outside. Unless something’s blocking its path (like furniture), a good rule is to take advantage by leaving every vent wide.
Melt Any Ice
If your unit is iced up, the ice will melt quickly. It may be wise to turn off some of the cooler’s components so that they can work in harmony with one another to speed up this process and reduce costs on utility bills.
You don’t have to be a professional AC repair company to fix your AC unit. Of course, there are things that only an experienced and qualified service company could handle – adding more Freon or electrical work would fall into this category as well. And if you ever need help with that, you can always visit onthespothvac.com/hvac-allen-tx to get all your cooling needs fulfilled.