Tech

High Tech Geothermal Heating and Air Conditioning

More and more people are interested in using new technology when it comes to heating and air conditioning. Spending less for your energy, and having a smaller impact on the environment isn’t enough anymore. Customers today are looking for the technologies that are both hi-tech and cut down your energy bill altogether.

Whether you’re looking to replace the old and conventional water heater with tanks or you want to install a modern system in your new home, the choices are more than you’d imagine. You just need to make your bits and bobs before deciding which is going to work the best for you and your household.

Which are the hi-tech cooling options nowadays?

The times where tank-style water heaters and conventional AC systems were the only options for your home are all gone. You no longer look for the traditional technologies with manual operation, as you want features that allow remote control while cutting down your utility bills too.

Here are some of the technologies that caught people’s attention in the last couple of years:

  1. Ice-powered air-conditioning

It does sound surprising, but not so much when you come to give it a better thought. An ice-powered air conditioning unit will freeze water in a tank throughout the night. The highest electrical energy demand is at night. Therefore the ice will cool down the home the next day.

There’s constant interest in improving the air-conditioning technologies, and this one ensures enough cooling air during the highest demand hours of electricity throughout the day.

  1. Thermally-driven air conditioning

The technology is rather new, and it’s winning fans as we speak. It’s expected to spread a lot in the next years to come. Thermally Driven Air Conditioning system depends on solar energy and natural gas. It’s highly effective and offers more cooling abilities that any other kind of system, eliminating all the electricity costs.

  1. Motion-activated air-conditioning

As the name says it, the technology uses sensors and aluminum rods hanging down from the ceiling, so that the motion activates the system. In a nutshell, the air conditioner will run if there are people inside.

A motion-activated AC system is excellent as it’s also compact and portable, cutting down the energy and utility spending.

Heating and water heating systems that keep money in your wallet

Even if new heating technologies may not be the perfect option for all households, it doesn’t mean you shouldn’t give them a look.

Here are some that people are slowly choosing over conventional technologies:

  1. Tankless water heaters

Tankless water heaters have been in town for a couple of years now, and we totally understand why. Not only that they solve the storage space (they have no tank and are typically small and compact), but they also are highly energy effective. They give hot water endlessly on demand and use fuel (gas or electric) only when you’re tapping the hot water.

The benefits of tankless water heaters are many, with a low-maintenance and long lifespan as some of the most significant. Should you decide to find out all the details, don’t hesitate to check informinc.org. They sure know what tankless water heaters are all about, providing you all the info you need about the models, shopping guide, reputed brands, and current models. They don’t skip the info about service and maintenance, which only gives you another reason for checking.

  1. Geothermal and Air-source heat pump water heaters

The water heating systems using heat pumps and not gas/electric heating elements are also some of the latest technology. The heat pump works as a reverse refrigerator. Unlike the latter that sucks heat out of limited space and discharging it into the surrounding environments, the heat pumps use the heat from the environment, concentrating it into an enclosed space.

There are two kinds of heat pump water heaters:

  • Air source- The system with getting the heat from the surrounding air, which is why you need to install it in a room with excess heat (near a furnace is the right place). It doesn’t work in cold areas, and it tends to cool the room where it’s installed.
  • GeothermalGeothermal- The geothermal heat pumps will get the heat from the ground during the colder winter months. During warm seasons, they will get the heat from the air.
  1. Floor heating

This time, electric wires and loops of pipes run warm liquid under the floors in your home, which is why the house gets warm. You no longer have hot air heating your home, but a floor heating system that gives heat and eliminates swings in temperature.

The level of insulation in your home is significant, and the floor heating system may raise energy efficiency with 30% more than a conventional heating system.

  1. Ductless HVAC systems

There’s an intricate and sophisticated maze of ductwork for most HVAC systems. A ductless system only includes point-of-use handlers that will give air-conditioned straight into a room or specific areas of your home.

The same principle applies to under the sink tankless water heaters that give hot water to a single fixture. In order to be efficient, you really need to do some planning.

Ductless systems are 40% more effective than traditional heating and cooling systems, with installation being straightforward and non-intrusive.

  1. Entirely automated households

Many people today are interested in creating a “smart home.” With so many computerized appliances and products, it makes perfect sense that you also want to have an automated water heater, AC, and heating system.

The modern systems are connected to other systems in your home so adjustments are easy to make for your household.

If you leave your home and forget to turn it off, you may quickly go on your phone and make the necessary adjustments. The choices are many, and you need to have the patience and the hi-tech skills to make the best choices.

  1. Variable refrigerant flow systems

The systems within the category connect an outside condensing unit to several fan coils throughout your residence. Every coil and evaporator is individually controlled, lowering waste from overall located resources.

The variable refrigerant flow systems also improve job growth and economic development and are incredibly efficient for the modern home.

One fair conclusion

There are many features for the heating/water heating/air conditioning systems that ease out the use and cut down the spending. From the dual heat exchanger to smart control sensors or variable-speed motors, the functions that make technologies modern and energy-efficient are many. You just need the will and the money to add as many as you can!

 

Add Comment

Click here to post a comment